机载武器控制系统算法研究

机载武器控制系统的算法是其软件部分的核心,算法的最终目的是保证在一定的条件下实现最有利的武器运用方案。将机载武器控制系统的算法分为四个不同的子算法,对每一子算法的建立方法进行了描述,最后得到形成执行命令的算法,即武器运用方案执行命令分配及形成的算法。     

中庭防排烟系统性能化设计探析

阐述中庭防排烟性能化设计的具体过程 ,并对防排烟系统设计的运用进行举例。     

人本主义教育思想的德育解读与借鉴

人本主义教育思想在教育理念、教育目标、教育过程、教育方法、教育评价等方面均对德育具有借鉴意义。德育的目标指向：培育受教育者的完美人性;实施途径：强调受教育者的直接经验;德育模式：凸显受教育者的主体地位。     

论防止利益冲突制度的构建

利益冲突可分为一般意义的利益冲突和廉政意义的利益冲突。目前，我国常见的利益冲突类型有交换型利益冲突、权力型利益冲突、双重型利益冲突和集体型利益冲突等。构建防止利益冲突制度，其内容大体包括建立防止利益冲突组织机构、利益冲突教育制度、回避制度、利益申报制度、公务员离职制度、反腐倡廉监督检查制度、立法和公共政策制定过程中的利益协调制度等。     

基于条件熵的不完备信息系统属性约简算法

在相容关系下定义了三种不完备条件熵——H′条件熵、E′条件熵和I′条件熵,并对它们的性质进行了分析比较,研究发现,H′条件熵和I′条件熵不适用于相容关系下信息观点的约简。利用E′条件熵刻画信息系统中属性的相对重要性,设计了一种新的基于信息论观点的启发式约简算法,它统一了完备信息系统与非完备信息系统中的约简方法。通过实例说明,该算法能得到决策表的相对约简。     

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

一种BP神经网络算法的改进模型

首先对BP网络的结构和算法进行了分析,针对BP网络收敛速度慢,容易陷入局部极小等问题,提出了一种改进的BP网络模型,并对该模型算法进行了改进,通过激活函数的选择,网络的初始化,学习率的调整和训练样本数据的处理等方法,可实现加快网络的收敛速度,并且较好的解决局部最优问题.     

基于ADC的炮兵激光观测仪侦察效能分析

运用了效能分析方法,针对复杂战场环境下炮兵侦察系统的效能进行分析,特别是炮兵激光观测仪,揭示其内在规律,为提高现有侦察装备的作战效能找到重要途径,也为指挥员的决策提供可靠的战略支持.在侦察系统效能分析理论的基础上,对典型的激光观测仪侦察装备进行了计算评估验证,其方法和成果可供其他武器系统效能评估时借鉴参考.     

基于博弈论的装备科研、购置、维修经费比例关系优化分析

通过不同时期国家战略部署、科研发展情况及经济承受能力对装备经费分配的影响分析,采用博弈的方法,建立了装备科研、购置和维修费之间的比例关系优化模型,给出了寻求纳什均衡点的迭代算法,并进行了仿真计算.仿真结果证明了该方法的可行性与正确性.